page_banner

Ngwaahịa

  • FT hinge boring forstner drill bits for big hole

    FT hinge na-agwụ ike forstner ọkpọ ọkpọ maka nnukwu oghere

    FT ibe n'ibe na-emepụta site a mmepụta usoro kpamkpam dị iche iche na akuakuzinwo ibe n'ibe.Ejiri igwe igwe 4-axis rụọ ya.A na-emepụta ahụ bits nke akụkụ FT site na ụlọ ọrụ igwe 5-axis.

  • CNC wood compression milling cutter

    CNC osisi mkpakọ-egwe ọka cutter

    A na-arụpụtakwa onye na-eji igwe ihe igwe 5-axis CNC.

    A haziri ndị na-egbutu ihe igwe ihe nke ọma maka ịrụ osisi.Ọtụtụ efere kwesịrị ijide n'aka na enweghị mgbawa ihu n'akụkụ abụọ, na obere ọjà kwụ ọtọ enweghị ike izute arụmọrụ maka ọtụtụ igwe cnc.The mkpakọ cutters' n'ihu njedebe nke a dị elu na njedebe dị ala, yabụ na ịkwesighi ichegbu onwe gị maka mgbawa ihu.Ọ nwere ike imeghari ka ọ dị ngwa ngwa nri nri karịa ka ọjà rawụta kwụ ọtọ site na ọjà gburugburu.

  • CNC KJ1 woodworking drill bits

    CNC KJ1 ihe na-akụ osisi

    KJ-1 drill bits bụ ngwaahịa flagship anyị nke ejiri igwe igwe 5-axis mee.

    KJ-1 ihe eji eme ihe mejupụtara n'ọnụ tungsten carbide drill, tungsten carbide drill body na nchara nchara.Banyere usoro ịgbado ọkụ, KJ-1 na-anabatakwa otu nkwụnye ịgbado ọkụ dị ka TCT.N'ihi na KJ-1 olulu mmiri kwesịrị ibu karịa torque, nkwụnye ịgbado ọkụ nwere ike ịbawanye ebe ịgbado ọkụ iji hụ na nkwụsi ike n'ozuzu nke olulu ahụ.N'otu aka ahụ, iji gboo mkpa nhazi dị iche iche, anyị na-ejikwa carbide dị iche na KJ-1 ruo KJ-2 na ZY.

  • 2F/3F/4F Solid carbide spiral milling cutter

    2F/3F/4F Mpempe ihe igwe nri carbide siri ike

    Igwe ihe igwe ngwụcha bụ onye na-eji igwe nri a na-ahụkarị.A na-eji igwe igwe na-emecha ihe igwe igwe ndị ọzọ niile.

    Igwe ihe ngwucha (n'etiti ahịrị na ọnụ ọgụgụ) bụ ngwaọrụ na-egbutu ezé n'otu akụkụ na akụkụ.A na-ejikarị okwu a na-eji ihe eji egbu ihe eme ihe iji na-ezo aka na ndị na-egbu nri dị larịị, ma ọ na-agụnyekwa ndị na-egbu osisi okirikiri (nke a na-akpọ isi bọọlụ) na ndị na-egbu osisi fillet (a na-akpọ imi ehi ma ọ bụ mgbanaka).A na-ejikarị ígwè dị elu ma ọ bụ carbide cimented eme ha ma nwee otu ma ọ bụ karịa grooves.Ha bụ ngwa ọrụ a na-ejikarị na igwe igwe igwe kwụ ọtọ.

  • CNC woodworking Solid Carbide roughing miliing cutter

    CNC na-arụ ọrụ osisi Solid Carbide roughing miling cutter

    A na-arụpụta onye na-egwe ọka njedebe siri ike anyị site na igwe ihe igwe 5-axis CNC.

    Onye na-egwe ọka ngwụcha siri ike nwere ike wepu nnukwu ihe ngwa ngwa.Nke a na-egwe ọka egwe ọka na-eji udi eze wavy na mpụta.A na-eji carbide tungsten na-egwe ọka niile na-egwe ọka ma enwere ọtụtụ ọkwa siri ike maka ịhọrọ-HRC 45 /HRC 55/HRC 65/HRA 90/HRA92(Ebube HRA 92).

  • KJ2 CNC tungsten Carbide head blind-hole dowel drills

    KJ2 CNC tungsten Carbide isi kpuru oghere dowel akpu

    KJ-2 ọkpọ nkụ bụ ngwaahịa anyị kacha eji eme ihe nke ejiri igwe igwe 4-axis mee.

    Brad point akuakuzinwo ibe n'ibe e mere kpọmkwem maka igbutu osisi, brad point drills bụ gafee n'etiti spade bit ájá ighikota drills.Oghere nke mkpọpu ihe ahụ yiri mgbagharị mgbagharị, nwere ọwa mgbawa na-efegharị efegharị gburugburu ogwe.Ọtụtụ n'ime ịkpụ na-eme ka egbugbere ọnụ nke ọwa ahụ dị mma, ma oghere ahụ na-amalite n'ezie site na obere - dayameta brad point (ma ọ bụ spur) nke na-eduga ogwe n'ime oghere.Abụọ ndị ọzọ spur nọdụrụ n'akụkụ mpụta akukuku ahụ na-enyere aka idobe egwu ahụ n'ịntanetị.A na-egbutukarị ọwa ndị ahụ na brad point drills nke na-agbagharị agbagọ, iji kpochapụ ihe mkpofu osisi.Ọ dabara maka igwe osisi CNC.

    Enwekwara ụdị isi abụọ maka KJ-2 bits – brad point drill bits na V na-agwụ ike.

  • ZY Carbide brad point boring drill bits for woodworking dowel drill

    ZY Carbide brad na-akụ ihe na-agwụ ike maka ịkụ osisi dowel

    ZY drill bits bụ ihe kacha ewu ewu n'ịrụ osisi nke ụlọ ọrụ anyị malitere.Nhazi agbakwunyere nke tozuru oke na ụdị okirikiri dị mfe bụ njirimara nke ngwungwu ihe a.

    Ngwuputa ihe nke ZY nwere carbide tungsten kacha echekwa ego.A na-eji tungsten carbide mee ihe n'ebe ọ kacha mkpa, Ọzọkwa, a na-emenyụ ígwè ahụ iji nweta nkwụsi ike a pụrụ ịdabere na ya.Site n'ọtụtụ nnwale, anyị na-ahụ akụkụ kachasị mma maka ịrụ ọrụ osisi.Ọ bụrụ na ị nwere ezigbo ngwọta ndị ọzọ, anyị na-enyekwa ọrụ ahaziri ahazi.Ọrụ ahaziri ahazi bụkwa maka nha.Nkwụnye teknụzụ ịgbado ọkụ na-emekwa ka alloy ghara ịda.

  • TCT CNC straight flute wood cutters router bits

    TCT CNC ogologo ọjà osisi cutters rawụta ibe n'ibe

    TCT rawụta ibe n'ibe bụ isi osisi cutter na China.

    TCT rawụta ibe n'ibe bụ otu ụdị egwe ọka cutter nke nwere ọjà kwụ ọtọ.TCT bụ otu bụ mbiri nke teknụzụ ịgbado ọkụ.Anyị na-agbakọta onye na-egwe ọka carbide na ígwè shank ọnụ.Ya mere ọ nwere ọnụ ala dị ọnụ ala na nhọrọ sara mbara maka nha shanks.

    Na TCT ibe n'ibe nwere ọtụtụ nkọwapụta mmepụta ihe, yabụ anyị nwere ike imepụta na ịkwakọ ngwaahịa ngwa ngwa.

  • TCT CNC Compression router bits

    TCT CNC mkpakọ rawụta ibe n'ibe

    TCT mkpakọ rawụta bit bụ nkwalite ụdị TCT dabere na mkpakọ egwe ọka cutter.

    Dị ka onye na-egwe ọka, a na-arụpụtakwa ya site na ngwa igwe CNC 5-axis.

    Ihe dị iche bụ na a na-eme nkenke dị mkpụmkpụ n'okpuru otu nkọwa ahụ, nke na-ebelata ọnụ ahịa ma na-eme ka ọnụahịa dịkwuo mma.N'otu oge ahụ, ịgbado ọkụ TCT na-enyekwa nhọrọ nke nha shank.A nwere ohere karịa na nhọrọ nke nkọwa na ọnụahịa.

  • CNC wood router milling Cutter

    CNC osisi rawụta-egwe ọka Cutter

    TCT rawụta ibe n'ibe nwere ezé bụ nkwalite dabere na TCT ogologo ọjà rawụta ibe n'ibe.N'ihi mgbakwunye nke ezé, TCT rawụta bit nwere ike igbubi ike na mgbawa njide ike.Yiri n'iji ihe eji egbugbere ọnụ ihe siri ike, nke nwere ezé na-arụ ọrụ nke ọma n'ịrụ ngwa ngwa.

    Anyị nwere ogologo akụkọ ihe mere eme nke 8 afọ maka R & D na mmepụta nke ibe n'ibe na ezé.Ihe kpatara ya bụ bee sawdust nta dị ka ike ike-egwe ọka cutter, nke bụ adaba n'ihi na n'ibu ájá collection.Site na nyocha na-aga n'ihu, anyị nwere ike nweta oke ọla edo nke igbutu ọnụ na ezé.